Transmission Assembly: Remove, Install, and Overhaul

Includes: R&I Transaxle Assembly, inspect and replace necessary Transmission components and road test.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
		10.0		A
Combination Procedure: CLUTCH PILOT BEARING: Remove & Replace:
w/Clutch Removed		0.2		C
Combination Procedure: CLUTCH PRESSURE PLATE: Remove & Replace:
		0.3		C
Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace:
		0.2		C
Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Replace:
Rear,w/Clutch Removed		0.5		B
Combination Procedure: FLYWHEEL: Remove & Replace:
w/Clutch Removed		0.3		C