Active Test: List: Notes

NOTE:

Before performing the active test for Auto Start Stop, execution conditions listed below must be met in each item.
*1: The restart conditions after stopping the engine are the same as those of "Auto Start Stop restart conditions" . Ref. to AUTO START STOP (DIAGNOSTICS)>DATA MONITOR>LIST .

Active test item	Contents	Execution condition
Electric oil pump control (Relay ON/OFF drive)	ON/OFF of the electric oil pump relay (Auto Start Stop) can be set.	"Common execution condition" established Electric oil pump diagnosis is normal
Electric oil pump control (Pump ON/OFF drive)	Command duty of the electric oil pump (Auto Start Stop) can be set. ENGINE TYPE FB: 10 → 55 % (for 120 seconds) ENGINE TYPE FA: 10 → 90 % (for 120 seconds)	"Common execution condition" established The value of [Coolant Temp.] is 80°C (176°F) or more CAN communication is normal
Sub power supply control (ON/OFF Dr.)	DC/DC converter can be set to ON (2 seconds).	"Common execution condition" established
Engine stop control ^*1	Auto Start Stop can be performed without driving the vehicle.	Auto Start Stop condition is established Ref. to AUTO START STOP (DIAGNOSTICS)>DATA MONITOR .