LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2025 >> Outback Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Body Control/Communication System >> Central Gateway Control Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Central Gateway Control Module: Installation

CAUTION:
  • When The Central Gateway Control Module Has Been Replaced, Be Sure To Perform The Module Registration.
  • Before Handling The Airbag System Components, Refer To "Caution" Of "General Description" In "Airbag System". Ref. To Airbag System>General Description>Caution .
  • When The Control Module Related To Immobilizer Has Been Replaced, Be Sure To Perform The Registration Of Immobilizer System. (Model Without Keyless Access With Push Button Start)
    • Except For C5 Model, Refer To "Type G" Described In "Registration Manual For Immobilizer".
    • For C5 Model, Refer To "Type I" Described In "Registration Manual For Immobilizer".
  1. Install The Central Gateway Control Module.

    Tightening Torque: 

    1.8 N.M (0.2 Kgf-M, 1.3 Ft-Lb)

  2. Install The Speaker Assembly Center. Ref. To Entertainment & Monitoring>Front Speaker>Installation .
  3. Install The Center Information Display Assembly And The Ornament Panel Mid Passenger. Ref. To Entertainment & Monitoring>Cockpit Display>Installation .
  4. Install The Cover Assembly Front. Ref. To Exterior/Interior Trim>Console Box>Installation .
  5. Install The Grip And Boot. Ref. To Control Systems>Select Lever>Installation .
  6. Install The Cover Center Upr Or The Driver Monitoring Unit Assembly. Ref. To Instrumentation/Driver Info>Driver Monitoring Unit>Installation .
  7. Install The Visor Assembly. Ref. To Instrumentation/Driver Info>Combination Meter>Installation .
  8. Install The Cover Lwr Driver. Ref. To Exterior/Interior Trim>Instrument Panel Lower Cover>Installation .
  9. Connect The Ground Terminal To Battery Sensor. Ref. To Repair Contents>Note>Battery .
  10. When The Central Gateway Control Module Has Been Replaced, Perform The Module Registration. Ref. To Common (Diagnostics)>Unit Registration>Operation .