Cancel Code: Operation

On [Start] screen, select [Diagnosis].
On [Vehicle selection] screen, input the target vehicle information and select [OK].
On [Main Menu] screen, select [Each System].
On [Select System] screen, select the corresponding system and select [Enter].
On [Select Function] screen, select [Cancel Code].

NOTE:

For detailed operation procedures, refer to "Help" of application.
When using the Subaru Select Monitor, turn the ignition switch to ON.
Stored codes will be cleared by Clear Memory. Ref. to COMMON (DIAGNOSTICS)>Clear memory
The cause when a function temporary stopped operating can be displayed when the cause is not a malfunction. When the failure is resolved, the function starts operating.