Pick-Up Coil
- Disconnect negative battery cable and remove distributor. Disconnect pick-up coil and ignitor from distributor. Disconnect Red and White wires from ignitor. Using an ohmmeter, measure resistance between Red and White wires. Replace pick-up coil if resistance is not as specified in PICK-UP COIL RESISTANCE table.
- Ensure ignition coil and pick-up coil have battery voltage. If ignition coil resistance and pick-up coil test okay, check for spark. If spark is still not available, go to the TESTS W/CODES article in this section.
PICK-UP COIL AIR GAP
| Application | Clearance In. (mm) |
|---|---|
| Samurai | .008-.016 (.2-.4) |
PICK-UP COIL RESISTANCE - Ohms @ 68°F (20°C)
| Application | Ohms |
|---|---|
| Samurai | 1.30-1.90 |