Removal & Installation
WARNING: This page is about the Sidekick JLX, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 4WD | 4.5 | 3.4 | C | |
| Combination Procedure: CLUTCH PILOT BEARING: Remove & Replace: | ||||
| 0.7 | C | |||
| Combination Procedure: CLUTCH PRESSURE PLATE &/OR DISC: Remove & Replace: | ||||
| 0.5 | C | |||
| Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: CLUTCH RELEASE SHAFT: Remove & Replace: | ||||
| 1.0 | C | |||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.7 | C | |||
| Combination Procedure: INPUT SHAFT GASKET &/OR SEAL: Remove & Replace: | ||||
| 0.5 | B | |||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| 0.4 | C | |||