Ignition Timing: Notes

IGNITION TIMING (Degrees BTDC @ RPM)

Application	Man. Trans.	Auto. Trans.
Sidekick	8 @ 750-850	8 @ 750-850

Fig 1: Locating Ignition Timing Mark (All Models)

Courtesy of SUZUKI OF AMERICA CORP.

Ensure transmission is in Neutral or Park position and parking brake is set. Inspect crankshaft pulley timing mark and timing mark indicator on timing belt cover. Clean marks as required. Start engine and warm to normal operating temperature. Turn all accessories off. Attach timing light to No. 1 spark plug wire. Ensure idle speed is correct. See IDLE SPEED SPECIFICATIONS table.
Aim timing light at crankshaft pulley and timing cover timing marks. If ignition timing is not within specification, loosen distributor hold-down bolt and rotate distributor to obtain correct ignition timing. Tighten distributor hold-down bolt and recheck timing. See IGNITION TIMING table.