Throttle Switch
NOTE:
Throttle switch is used only on Swift SOHC models with manual transaxle. Throttle position sensor is used on automatic transaxle models.
THROTTLE SWITCH CONTINUITY - SOHC M/T
| Application (1) | Specification | |||
|---|---|---|---|---|
| Between Terminals "A" & "B" | ||||
| With .012" (.30 mm) Clearance At Stop Screw | Continuity | |||
| With .035" (.89 mm) Clearance At Stop Screw | No Continuity | |||
| With Throttle Wide Open | No Continuity | |||
| Between Terminals "B" & "C" | ||||
| With .012" (.30 mm) Clearance At Stop Screw | No Continuity | |||
| With .035" (.89 mm) Clearance At Stop Screw | No Continuity | |||
| With Throttle Wide Open | Continuity | |||
| Between Terminals "A" & "C" | ||||
| With .012" (.30 mm) Clearance At Stop Screw | No Continuity | |||
| With .035" (.89 mm) Clearance At Stop Screw | No Continuity | |||
| With Throttle Wide Open | No Continuity | |||
|
||||