Fuel System Pressure Release
WARNING:
ALWAYS relieve fuel pressure before disconnecting any fuel injection-related component. DO NOT
allow fuel to contact engine or electrical components.
FUEL PUMP RELAY LOCATION
| Model | Location |
|---|---|
| Swift | In Engine Fuse/Relay Box, Behind battery |
- Place transmission in Neutral or Park and set parking brake. Remove fuse/relay box cover located in engine compartment, behind battery. Remove coolant reservoir from bracket.
- Disengage harness connector from fuel pump relay from underneath fuse/relay box. See FUEL PUMP RELAY LOCATION table. See Figure and Figure . Loosen fuel tank filler cap to release tank vapor pressure. Start engine and let idle until engine dies. Crank engine 2-3 more times to ensure fuel pressure is dissipated from system. Turn ignition off and remove key. Fuel system may now be opened safely. When loosening fuel line, hose or fitting, cover it with shop towel to absorb leaking fuel. When repair is completed, reconnect relay.