Throttle Position Sensor (TPS): Notes

THROTTLE POSITION SENSOR (TPS) RESISTANCE

Application

Ohms

DOHC

Between Terminals "C" & "D"

With .012" (.30 mm) Clearance At Stop Screw

0-2000

With .035" (.89 mm) Clearance At Stop Screw .

Infinity

Between Terminals "C" & "A"

3,500-6,500

Between Terminals "C" & "B"

At Idle

0-500

At Wide Open Throttle

3,500-6,500

SOHC ⁽¹⁾

Between Terminals "A" & "B"

With .012" (.30 mm) Clearance At Stop Screw

Less Than 5000

With .035" (.89 mm) Clearance At Stop Screw .

Infinity

Between Terminals "A" & "D"

4,370-8,130

Between Terminals "A" & "C"

At Idle

240-1,140

At Wide Open Throttle

3,170-6,600

⁽¹⁾	Throttle position sensor is used only on SOHC auto. transaxle, SOHC manual transaxle uses throttle switch.

CAUTION: DO NOT adjust Swift DOHC throttle stop screw to adjust idle. Throttle stop screw is factory set and is used as zero reference point for all other adjustments.