LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1991 >> Samurai JS >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Injector (TBI) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Injector (TBI): Installation

  1. Apply thin coat of fuel to new injector "O" rings. Install "O" rings on injector. Insert injector into throttle body. Carefully install wiring harness connector to injector.
  2. Apply thread locking compound to injector cover mounting screws and install injector cover. Torque injector cover screws to 17 INCH lbs. (1.9 N.m). Connect fuel feed pipe with new "O" ring. Torque fuel feed pipe bolts to 71-106 INCH lbs. (8.0-11.9 N.m). Connect negative battery cable. Check for fuel leaks.
  3. With fuel pump relay connected, install a jumper wire between fuel pump relay Pink/Black and Black/White wires. Fuel pump relay is located on right kick panel, above ECM. See FigureOn all models, turn ignition on (engine off) to activate fuel pump..
scientia non olet · About LEMON Manuals