Clutch Start Switch
- Apply parking brake firmly. Place gearshift lever in the Neutral position. Disconnect wires at the clutch start switch. Loosen the lock nut and turn switch outward. Depress the clutch pedal to the floor. Return clutch pedal along its travel from floor. Refer to the CLUTCH START SWITCH SPECIFICATIONS .
- Connect an ohmmeter to the switch. Slowly screw switch in until it is on. Hold switch at this position and tighten lock nut. Connect wire.
CLUTCH START SWITCH SPECIFICATIONS
| Application | Height From Floor In. (mm) |
|---|---|
| Samurai | Not Available |
| Sidekick | 2.0-2.7 (50-70) |