Fuel System Pressure Release

Place transmission in Neutral (M/T) or Park (A/T). Set parking brake and block drive wheels. Disconnect control relay connector "A". Control relay is located on left kick panel. See Fig 1 . Remove fuel filler cap to release fuel vapor pressure in fuel tank.
Reinstall fuel filler cap. Start engine and run until engine runs out of fuel. After engine runs out of fuel, crank engine 2-3 times for about 3 seconds to dissipate fuel pressure in lines. Reconnect control relay connector "A".

Fig 1: Locating Control Relay (Sidekick)

Courtesy of SUZUKI OF AMERICA CORP.