Mechanical Inspection: Compression
Check engine mechanical condition with a compression gauge, vacuum gauge, or an engine analyzer. See engine analyzer instruction manual for specific instructions.
WARNING:
DO NOT use ignition switch during compression tests on fuel injected vehicles. Use a remote starter to crank engine. Fuel injectors on many models are triggered by ignition switch during cranking mode, which can create a fire hazard or contaminate the engine's oiling system.
COMPRESSION SPECIFICATIONS
| Application | Specification | ||||
|---|---|---|---|---|---|
| Compression Ratio | |||||
| DOHC | 10.0:1 | ||||
| SOHC | 9.5:1 | ||||
| Compression Pressure | psi (cm2 ) | ||||
| DOHC | |||||
| Standard | 206 (14.5) | ||||
| Limit | (1) 156 (10.9) | ||||
| SOHC | |||||
| Standard | 199 (14.0) | ||||
| Limit | (1) 156 (10.9) | ||||
|
|||||