LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1992 >> Samurai JL >> Repair and Diagnosis >> Engine Performance >> Engine Controls - Adjustments >> Throttle Position Sensor (TPS) >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Throttle Position Sensor (TPS): Notes

THROTTLE POSITION SENSOR (TPS) RESISTANCE

Application Ohms
Between Terminals "C" & "D"
With .008" (.20 mm) Clearance At Stop Screw 0-550
With .016" (.41 mm) Clearance At Stop Screw Infinity
Between Terminals "A" & "D" 3500-6500
Between Terminals "B" & "D"
At Idle (1) 0-2000
At Wide Open Throttle (2) 2000-6500
(1) To obtain idle position, apply 19 in. Hg vacuum to throttle opener.
(2) Idle and wide open throttle readings should differ more than 2000 ohms.
CAUTION: DO NOT  adjust Samurai throttle stop screw to adjust idle. Throttle stop screw is factory set and is used as zero reference point for all other adjustments.
scientia non olet · About LEMON Manuals