Pick-Up Coil Air Gap
- Remove distributor cap and rotor. Using non-magnetic shim thickness gauge, measure air gap between reluctor tooth and pick-up coil. See PICK-UP COIL AIR GAP
table. If adjustment is required, loosen pick-up coil plate hold-down screws.
- Using blade screwdriver, move pick-up coil plate to adjust air gap to specification. See PICK-UP COIL AIR GAP
table. Tighten screws, and recheck air gap. Ensure no metal particles are on pick-up coil tooth.
PICK-UP COIL AIR GAP
| Application |
In. (mm) |
| Sidekick |
|