EFI Main Relay
- Relay is mounted under left side of instrument panel. Turn ignition off. Check for battery voltage on Black/Red wire terminal of relay. If battery voltage is present, go to next step. If battery voltage is not present, check Black/Red wire circuit between relay and battery, including fuse No. 14.
- Turn ignition on. Check for battery voltage on Black/White wire terminal of relay. If battery voltage is present, go to next step. If battery voltage is not present, check Black/White wire circuit between relay and battery, including fuse No. 8.
- Turn ignition off. Disconnect negative battery cable. Remove relay from main fuse box. Check for continuity between terminals "A" and "B". See Figure . Continuity should not be present. If continuity exists, replace relay.
- Measure resistance between terminals "C" and "D". Resistance should be 63-77 ohms. If resistance is not correct, replace relay. Apply battery voltage to terminals "C" and "D". Continuity should be present. If continuity is not present, replace relay.