Fuel System Pressure Release
- Place transmission in Neutral (M/T) or Park (A/T). Set parking brake and block drive wheels.
- Disconnect control relay connector "A" (relay with pink wire). Control relay is located on left kick panel. See Fig 1
. On all models, remove fuel filler cap to release fuel vapor pressure in fuel tank.
- Reinstall fuel filler cap. Start engine and run until engine runs out of fuel. After engine runs out of fuel, crank engine 2-3 times for about 3 seconds to dissipate fuel pressure in lines. Reconnect control relay connector "A".
Courtesy of SUZUKI OF AMERICA CORP.