Throttle Position Sensor (TPS): Notes

THROTTLE POSITION SENSOR (TPS) RESISTANCE (DOHC)

Application		Ohms
Between Terminals "C" & "D"
With .012" (.30 mm) Clearance At Stop Screw		0-500
With .035" (.89 mm) Clearance At Stop Screw		Infinity
Between Terminals "C" & "A"		3500-6500
Between Terminals "C" & "B"
At Idle		0-2000
At Wide Open Throttle		3500-6500

THROTTLE POSITION SENSOR (TPS) RESISTANCE (SOHC) ⁽¹⁾

Application

Ohms

Between Terminals "A" & "B"

With .012" (.30 mm) Clearance At Stop Screw

Less Than 5000

With .035" (.89 mm) Clearance At Stop Screw

Infinity

Between Terminals "A" & "D"

4370-8130

Between Terminals "A" & "C"

At Idle

240-1140

At Wide Open Throttle

3170-6600

⁽¹⁾	Throttle position sensor is used only on SOHC A/T; SOHC M/T uses throttle switch.

CAUTION: DO NOT adjust Swift DOHC throttle stop screw to adjust idle. Throttle stop screw is factory-set and is used as zero reference point for all other adjustments.