Throttle Position Sensor (TPS)

NOTE: TPS is used on all models except SOHC with manual transmission. SOHC with manual transmission uses Throttle Switch.

THROTTLE POSITION SENSOR (TPS) RESISTANCE - DOHC ⁽¹⁾

Application

Ohms

Between Terminals "C" & "D"

With .012" (.30 mm) Clearance At Stop Screw

0-500

With .035" (.89 mm) Clearance At Stop Screw

Infinity

Between Terminals "C" & "A"

3500-6500

Between Terminals "C" & "B"

At Idle

0-2000

At Wide Open Throttle

3500-6500

⁽¹⁾	See Fig 1 .

Fig 1: Throttle Position Sensor (TPS) Terminal ID (DOHC)

Courtesy of SUZUKI OF AMERICA CORP.

THROTTLE POSITION SENSOR (TPS) RESISTANCE - SOHC A/T ⁽¹⁾

Application

Ohms

Between Terminals "A" & "B"

With .012" (.30 mm) Clearance At Stop Screw

Less Than 5000

With .035" (.89 mm) Clearance At Stop Screw

Infinity

Between Terminals "A" & "D"

4370-8130

Between Terminals "A" & "C"

At Idle

240-1140

At Wide Open Throttle

3170-6600

⁽¹⁾	See Fig 2 .

Fig 2: Throttle Position Sensor (TPS) Terminal ID (SOHC A/T)

Courtesy of SUZUKI OF AMERICA CORP.