LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1994 >> Samurai >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests - 1.3L TBI >> Engine Sensors & Switches >> Oxygen Sensor (O2S)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oxygen Sensor (O2S)

  1. Start and warm engine to operating temperature. Pull back seal at O2S connector. Using a DVOM with at least a 10-megohm input impedance, backprobe O2S connector.
  2. Increase engine speed to 2000 RPM and hold for about one minute while watching voltmeter. Reading should fluctuate between zero and one volt, without being constantly high or low. If voltage is not as specified, see CODE 13 in TESTS W/CODES - 1.3L TBI article in this section.
scientia non olet · About LEMON Manuals