Wheel Alignment Specifications

NOTE: Prior to performing wheel alignment, perform preliminary visual and mechanical inspection of wheels, tires and suspension components. See PRE-ALIGNMENT INSTRUCTIONS in WHEEL ALIGNMENT THEORY/OPERATION article in the GENERAL INFORMATION section.

WHEEL ALIGNMENT SPECIFICATIONS

Application

Preferred

Range

Camber ⁽¹⁾

Front

0.25 To 1.75

Caster ⁽¹⁾

3.5

2.5 To 4.5

Toe-In ⁽²⁾

Front

.18 (4.5)

0.1 To 0.28 (2.5 To 7)

Toe-In ⁽¹⁾

Front

.36

0.2 To 0.56

Toe-Out On Turns ⁽¹⁾

Inner

N/A

Outer

N/A

⁽¹⁾	Measurement is in degrees.

⁽²⁾	Measurement is in inches (mm).