Fuel Injector(s)
- If engine does not run, go to step 3). If engine runs, listen for operational noise from fuel injector(s). Cycling of injectors should increase and decrease with engine speed.
- Turn ignition off. Disconnect injector connector. Measure resistance across injector terminals. At 68°F (20°C), resistance should be as specified in FUEL INJECTOR RESISTANCE table.
FUEL INJECTOR RESISTANCE
| Application | Ohms |
|---|---|
| Esteem | 12-16 |
NOTE:
For fuel system pressure testing and specifications, see the BASIC TESTING
article.