Starter No-Load Test
CAUTION:
DO NOT perform starter no-load test for more than 5 seconds, or starter may be damaged.
- Connect ammeter, battery voltage and ground to starter. See Fig 1 . Ensure starter rotates smoothly, drive pinion moves outward and no-load current draw is within specification. See STARTER NO-LOAD CURRENT DRAW SPECIFICATIONS table.
- Repair starter if starter no-load current draw is not within specification or drive pinion does not move outward. Disconnect test equipment.
STARTER NO-LOAD CURRENT DRAW SPECIFICATIONS
| Application | Maximum Amperage At 11 Volts |
|---|---|
| Samurai | 60 |