LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1995 >> Samurai >> Repair and Diagnosis >> Engine Performance >> Engine Controls - Adjustments >> Throttle Position (TP) Sensor >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Throttle Position (TP) Sensor: Notes

THROTTLE POSITION (TP) SENSOR RESISTANCE

Application Ohms
Between Terminals "C" & "D"
With .008" (.20 mm) Clearance At Stop Screw 0-550
With .016" (.41 mm) Clearance At Stop Screw Infinity
Between Terminals "A" & "D" 3500-6500
Between Terminals "B" & "D"
At Idle (1) 0-2000
At Wide Open Throttle (2) 2000-6500
(1) To obtain idle position, apply 19 in. Hg vacuum to throttle opener.
(2) There should be more than 2000 ohms difference between idle and wide open throttle resistance.
CAUTION: DO NOT  attempt to adjust throttle stop screw to adjust idle. Throttle stop screw is factory-set and is used as zero reference point for all other adjustments.
scientia non olet · About LEMON Manuals