LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1995 >> Samurai >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Relays & Solenoids >> Relays >> Fuel Pump Relay
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pump Relay

  1. Fuel pump relay is constructed the same as main relay and should be checked in same manner. See appropriate MAIN RELAY. Turn ignition off. Disconnect negative battery cable. Disconnect relay connector and remove relay. See FUEL PUMP RELAY LOCATION  table. Using an ohmmeter, check continuity between terminals "A" and "B". See Figure . If continuity is not present, go to next step. If continuity is present, replace relay.
  2. Check resistance between terminals "C" and "D". If resistance is as described in MAIN RELAY, go to next step. If resistance is not as described in MAIN RELAY, replace relay.
  3. Energize relay by applying battery voltage and ground to terminals "C" and "D". Check continuity between terminals "A" and "B". If continuity is present, relay is okay. If continuity is not present, replace relay.
FUEL PUMP RELAY LOCATION

Application Location
Samurai Under Far Right Side Dash, Above ECM
scientia non olet · About LEMON Manuals