LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1995 >> Swift Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Distributor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition System: Distributor: Installation

  1. Before installing distributor, ensure "O" ring is in good condition. Replace as required. If new "O" ring is installed, lubricate with engine oil.
  2. Install distributor while aligning distributor drive coupling into slot of camshaft. Distributor drive coupling and camshaft slot are offset. If distributor coupling does not fit into slot, turn distributor shaft 180 degrees.
  3. Ensure distributor is fully seated. Install distributor hold-down bolt. Adjust ignition timing. See the BASIC TESTING article.
scientia non olet · About LEMON Manuals