Sidekick 1.8L
Disconnect ignitor harness connectors and remove ignitor. Using an ohmmeter, connect leads to ignitor and check for continuity between specified terminals of corresponding cylinders. See Fig 1 . See IGNITOR RESISTANCE table. Replace ignitor if continuity is not as specified.
IGNITOR RESISTANCE
| Positive Lead | Negative Lead | Continuity | ||
|---|---|---|---|---|
| "E" | "I" | (1) Yes | ||
| "E" | "G" | (1) Yes | ||
| "I" | "G" | (1) Yes | ||
| "I" | "E" | No | ||
| "G" | "E" | No | ||
| "G" | "I" | (1) Yes | ||
|
||||