ISC Actuator
- Disconnect ISC actuator connector. Using an ohmmeter, ensure continuity exists between ISC actuator terminals No. 1 (Gray/Red wire) and No. 3 (Gray wire).
- Using four 1.5-volt batteries (6 volts) in series, connect batteries to ISC actuator terminals No. 1 and 3. DO NOT connect batteries for more than one second.
- With positive side of batteries connected to ISC actuator terminal No. 3, ensure actuator extends. With positive side of batteries connected to ISC actuator terminal No. 1 (leads reversed), ensure actuator retracts. If any of ISC actuator tests fail, replace lower throttle body.