Throttle Position (TP) Sensor

NOTE: See PIN VOLTAGE CHARTS - 1.8L article and appropriate wiring diagrams in WIRING DIAGRAMS - 1.8L article for PCM connector and wire terminal identification.

THROTTLE POSITION (TP) SENSOR VOLTAGE ⁽¹⁾⁽²⁾

Application

Volts

At Idle

.35-.65

At Wide Open Throttle

3.5-4.5

⁽¹⁾	Ignition on and engine off.

⁽²⁾	On models with M/T, backprobe between ground and PCM connector "B", terminal No. 17 (Green wire). On models with A/T, backprobe between ground and PCM connector "D", terminal No. 25 (Green wire).