LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2003 >> Aerio S, Automatic >> Repair and Diagnosis >> Engine Performance >> Specifications >> Engine Controls - Service & Adjustment Specifications >> Fuel System >> Throttle Position Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Throttle Position Sensor

NOTE: Perform all voltage and resistance tests using a Digital Volt-Ohm Meter (DVOM) with a minimum 10-megohm input impedance.
THROTTLE POSITION SENSOR RESISTANCE

Application (1) Ohms
Aerio
Between Terminals No. 1 & 2 100-6500
Between Terminals No. 1 & 3 (2) 4000-6000
Grand Vitara & XL-7
Between Terminals No. 1 & 3 4000-6000
Between Terminals No. 2 & 3 (2) 0-4600
Vitara
Between Terminals No. 1 & 2 (2) 20-6000
Between Terminals No. 1 & 3 4000-6000
XL-7
Between Terminals No. 1 & 2 (2) 20-6000
Between Terminals No. 1 & 3 4000-6000
(1) See Fig 1 for terminal identification.
(2) Varying depending on degree of throttle valve opening.
Fig 1: Identifying Throttle Position Sensor Terminals (Typical)
G98C10654Courtesy of SUZUKI OF AMERICA CORP.
THROTTLE POSITION SENSOR VOLTAGE

Application (1) Volts
Aerio (2)(3)
Throttle Fully Close .35-.65
Throttle Fully Open 3.5-4.5
Grand Vitara (2)(3)
Throttle Fully Close .35-.65
Throttle Fully Open 3.5-4.5
Vitara (2)(3)
Throttle Fully Close .50-1.2
Throttle Fully Open 3.4-4.7
XL-7 (2)(3)
Throttle Fully Close .49-.91
Throttle Fully Open 3.76-4.36
(1) Ignition ON engine off.
(2) Measure TP sensor voltage using Suzuki scan tool connected to DLC and ignition switch in LOCK position. See Figure.
(3) With engine at normal operating temperature.
scientia non olet · About LEMON Manuals