Anti-Lock Brake Systems
- Precautions
- General Description
- Schematic and Routing Diagram
- Components Location
- Diagnostic Information and Procedures
- ABS Check
- ABS Warning Lamp Check
- EBD Warning Lamp (Brake Warning Lamp) Check
- Diagnostic Trouble Codes Check
- Diagnostic Trouble Codes Table
- Diagnostic Trouble Codes Clearance
- Scan Tool Data
- Scan Tool Data Definition
- ABS Warning Lamp Does Not Come On at Ignition Switch ON
- ABS Warning Lamp Comes ON Steady
- ABS Warning Lamp Flashes Continuously while Ignition Switch Is ON
- Code (Diagnostic Trouble Codes) Is Not Outputted Even with Diagnosis Switch Terminal Connected to Ground
- EBD Warning Lamp (Brake Warning Lamp) Comes ON Steady
- Serial Data Link Circuit Check
- DTC C1015 (No. 15): G Sensor Circuit
- DTC C1021, C1022, C1025, C1026, C1031, C1032, C1035, C1036 (No. 21, 22, 25, 26, 31, 32, 35, 36): Wheel Speed Sensor Circuit or Sensor Ring
- DTC C1041, C1045, C1051, C1055, C1042, C1046, C1052, C1056 (No. 41, 45, 51, 55, 42, 46, 52, 56): Inlet/Outlet Solenoid Circuit
- DTC C1057 (No. 57): Power Source Circuit
- DTC C1061 (No. 61): ABS Pump Motor and/or Motor Relay Circuit
- DTC C1063 (No. 63): ABS Fail-Safe Relay Circuit
- DTC C1071 (No. 71): ABS Control Module
- Repair Instructions
- Specifications
- Special Tools and Equipment