Installation Procedure

Fig 1: View of Camshaft Position Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the CMP sensor and bolt.
Tighten: Tighten the CMP sensor bolts to 7 N.m (62 lb in).

Fig 2: Identifying Cover Screws

Courtesy of GENERAL MOTORS CORP.

Install the timing bolt front cover. Refer to Timing Belt Replacement in Engine Mechanical-1.6L.
Connect the CMP sensor electrical connector.
Install the engine cover.
Connect the negative battery cable.