LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2005 >> Verona EX >> Repair and Diagnosis >> Quick Lookups >> DTC Index >> Automatic Transmission DTCS
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Automatic Transmission DTCS

AUTOMATIC TRANSMISSION DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC Description Action
DTC P0562 SYSTEM VOLTAGE LOW System Voltage Low
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut off to the EDS valve.
DTC P0563 SYSTEM VOLTAGE HIGH System Voltage High
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut off to the EDS valve.
DTC P0601 INTERNAL CONTROL MODULE MEMORY CHECKSUM ERROR Internal Control Module Memory Checksum Error
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut off to the EDS valve.
DTC P0603 INTERNAL CONTROL MODULE KEEP ALIVE MEMORY (KAM) ERROR Internal Control Module Keep Alive Memory (KAM) Error
  • The TCM will record operating conditions at he time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut off to the EDS valve.
DTC P0604 INTERNAL CONTROL MODULE RANDOM ACCESS MEMORY (RAM) ERROR Internal Control Module Random Access Memory (RAM) Error
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut off to the EDS valve.
DTC P0606 TRANSAXLE CONTROL MODULE PROCESSOR FAULT Transaxle Control Module Processor Fault
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut off to the EDS valve.
DTC P0703 BRAKE SWITCH CIRCUIT MALFUNCTION Brake Switch Circuit Malfunction
  • TCM assume that the brake light always active.
  • Open lock up clutch.
DTC P0705 TRANSMISSION RANGE SENSOR CIRCUIT MALFUNCTION (PRNDL INPUT) Transmission Range Sensor Circuit Malfunction (PRNDL Input)
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control, position P, R and N also possible.
DTC P0710 TRANSMISSION FLUID TEMPERATURE OUT OF RANGE Transmission Fluid Temperature Out of Range
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • TCM assume the transaxle fluid temperature is 140 °F (60 °C).
  • No influence at vehicle running.
DTC P0711 TRANSMISSION FLUID TEMPERATURE SENSOR CIRCUIT RANGE / PERFORMANCE Transmission Fluid Temperature Sensor Circuit Range/ Performance
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • TCM assume the transaxle fluid temperature is 140 °F (60 °C).
  • No influence at vehicle running.
DTC P0712 TRANSMISSION FLUID TEMPERATURE SENSOR CIRCUIT SHORTED TO GROUND Transmission Fluid Temperature Sensor Circuit Shorted to Ground
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • TCM assume the transaxle fluid temperature is 60 °C.
  • No influence on driveability.
DTC P0713 TRANSMISSION FLUID TEMPERATURE SENSOR CIRCUIT SHORTED TO POWER AND OPEN Transmission Fluid Temperature Sensor Circuit Shorted to Power and open
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • TCM assume the transaxle fluid temperature is 60 °C.
  • No influence on driveability.
DTC P0715 INPUT SPEED SENSOR (ISS) CIRCUIT MALFUNCTION Input Speed Sensor Circuit Malfunction
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control, position P, R and N also possible.
  • Open lock up clutch.
DTC P0716 INPUT SPEED SENSOR (ISS) CIRCUIT RANGE / PERFORMANCE Input Speed Sensor Circuit Range/ Performance
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control, position P, R and N also possible.
  • Open lock up clutch.
DTC P0717 INPUT SPEED SENSOR (ISS) CIRCUIT NO SIGNAL Input Speed Sensor Circuit No Signal
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control, position P, R and N also possible.
  • Open lock up clutch.
DTC P0720 OUTPUT SPEED SENSOR (OSS) CIRCUIT MALFUNCTION Output Speed Sensor Circuit Malfunction
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear.
  • Open lock up clutch.
DTC P0721 OUTPUT SPEED SENSOR (OSS) CIRCUIT RANGE / PERFORMANCE Output Speed Sensor Circuit Range/ Performance
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear.
  • Open lock up clutch.
DTC P0722 OUTPUT SPEED SENSOR (OSS) CIRCUIT NO SIGNAL Output Speed Sensor Circuit No Signal
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Vehicle running remains actual gear.
  • Open lock up clutch.
DTC P0725 ENGINE SPEED INPUT CIRCUIT MALFUNCTION Engine Speed Input Circuit Malfunction
  • Adopt Emergency/Substitute mode and constant 4th gear.
  • Open lock up clutch.
DTC P0726 ENGINE SPEED INPUT CIRCUIT RANGE / PERFORMANCE Engine Speed Input Circuit Range/ Performance
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear.
  • Open lock up clutch.
DTC P0727 ENGINE SPEED INPUT CIRCUIT NO SIGNAL Engine Speed Input Circuit No Signal
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear.
  • Open lock up clutch.
DTC P0731 GEAR 1 INCORRECT RATIO Gear 1 Incorrect Ratio
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear.
  • High line pressure
DTC P0732 GEAR 2 INCORRECT RATIO Gear 2 Incorrect Ratio
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 3rd gear.
  • High line pressure.
DTC P0733 GEAR 3 INCORRECT RATIO Gear 3 Incorrect Ratio
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear.
  • High line pressure
DTC P0734 GEAR 4 INCORRECT RATIO Gear 4 Incorrect Ratio
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • High line pressure.
DTC P0741 TCC (TORQUE CONVERTER CLUTCH) CIRCUIT STUCK OFF TCC (Torque Converter Clutch) Circuit Stuck OFF
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Open lock up clutch.
DTC P0742 TCC (TORQUE CONVERTER CLUTCH) CIRCUIT STUCK ON TCC (Torque Converter Clutch) Circuit Stuck ON
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Open lock up clutch.
DTC P0781 1 - 2 SHIFT MALFUNCTION 1 - 2 Shift Malfunction
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 1st gear.
  • Open lock up clutch.
DTC P0782 2 - 3 SHIFT MALFUNCTION 2 - 3 Shift Malfunction
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 2nd gear.
  • Open lock up clutch.
DTC P0783 3 - 4 SHIFT MALFUNCTION 3 - 4 Shift Malfunction
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 3rd gear.
  • Open lock up clutch.
DTC P1604 DATA CHECK OF INTERNAL & EXTENDED RAM FAILED Data Check of Internal & Extended Ram Failed
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut off to the EDS valve.
DTC P1606 FAILURE OF EXTERNAL WATCHDOG Failure of External Watchdog
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
DTC P1779 ENGINE TORQUE INPUT SIGNAL MALFUNCTION Engine Torque Input Signal (CAN) Malfunction
  • Adjustable value, calculated over the substitute map throttle position, (engine speed, engine torque)
DTC P1791 THROTTLE POSITION INPUT SIGNAL CIRCUIT MALFUNCTION Throttle Position Input Signal (CAN) Malfunction
  • Adjustable value, calculated over the substitute map throttle position, (engine speed, engine torque)
DTC P1839 EDS 3 OUTPUT SHORTED TO GROUND EDS3 Output Shorted To Ground
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
DTC P1840 EDS 3 OUTPUT SHORTED TO POWER EDS3 Output Shorted To Power
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
DTC P1841 EDS 3 OUTPUT OPEN EDS3 Output Open
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
DTC P1850 SOLENOID 1 OUTPUT SHORTED TO GROUND Solenoid 1 Output Shorted To Ground
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
DTC P1851 SOLENOID 1 OUTPUT SHORTED TO POWER Solenoid 1 Output Shorted To Power
  • Hold lamp will blink.
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
DTC P1852 SOLENOID 1 OUTPUT OPEN Solenoid 1 Output Open
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
DTC P1853 SOLENOID 2 OUTPUT SHORTED TO GROUND Solenoid 2 Output Shorted To Ground
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
DTC P1854 SOLENOID 2 OUTPUT SHORTED TO POWER Solenoid 2 Output Shorted To Power
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
DTC P1855 SOLENOID 2 OUTPUT OPEN Solenoid 2 Output Open
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
DTC P1861 EDS 4 OUTPUT SHORTED TO GROUND EDS4 Output Shorted To Ground
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
DTC P1862 EDS 4 OUTPUT SHORTED TO POWER EDS4 Output Shorted To Power
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
DTC P1863 EDS 4 OUTPUT OPEN EDS4 Output Open
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
DTC P1864 EDS 5 OUTPUT SHORTED TO GROUND EDS5 Output Shorted To Ground
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
DTC P1865 EDS 5 OUTPUT SHORTED TO POWER EDS5 Output Shorted To Power
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
DTC P1866 EDS 5 OUTPUT OPEN EDS5 Output Open
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
DTC P1867 EDS 6 OUTPUT SHORTED TO GROUND EDS6 Output Shorted To Ground
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
DTC P1868 EDS 6 OUTPUT SHORTED TO POWER EDS6 Output Shorted To Power
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
DTC P1869 EDS 6 OUTPUT OPEN EDS6 Output Open
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
DTC P1871 EDS VALVE POWER SUPPLY CIRCUIT SHORTED TO POWER EDS Valve Power Supply Circuit Shorted To Power
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
  • Power supply cut OFF to the EDS valve.
DTC P1874 SOLENOID VALVE POWER SUPPLY CIRCUIT SHORTED TO POWER Solenoid Valve Power Supply Circuit Shorted To Power
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
DTC P1881 2 -1 SHIFT MALFUNCTION 2 -1 Shift Malfunction
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 3rd gear.
  • Open lock up clutch.
DTC P1883 3 - 2 SHIFT MALFUNCTION 3-2 Shift Malfunction
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 3rd gear.
  • Open lock up clutch.
DTC P1884 4 - 3 SHIFT MALFUNCTION 4 - 3 Shift Malfunction
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear.
  • Open lock up clutch.
DTC P1885 3 -1 SHIFT MALFUNCTION 3 - 1 Shift Malfunction
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 3rd gear.
  • Open lock up clutch.
DTC U0073 CAN BUS OFF FAILURE CAN Bus OFF Failure
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
DTC U0100 CAN RECEIVE ECM MESSAGE FAILURE CAN Receive ECM Message Failure
  • The TCM will record operating conditions at he time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
DTC U0101 CAN TRANSMIT MESSAGE FAILURE CAN Transmit Message Failure
  • The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
  • Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control.
  • After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible.
scientia non olet · About LEMON Manuals