Crankshaft Position (CKP) Sensor Installation

Installation should follow the removal procedure in the reverse order.
Install the crankshaft position (CKP) sensor.
Tighten:

Tighten the CKP sensor retaining bolt to 5 - 8 N.m (44 - 71 lb-in.).

Fig 1: Identifying Crankshaft Position (CKP) Sensor And Retaining Bolt
Courtesy of SUZUKI OF AMERICA CORP.
Install the CKP sensor heat shield housing.
Tighten:

Tighten the CKP sensor heat shield housing bolt to 7 - 9 N.m (62 - 80 lb-in.).

Fig 2: Identifying CKP Sensor Heat Shield Housing And Retaining Bolts
Courtesy of SUZUKI OF AMERICA CORP.