Alarm Function
Under conditions as described in the table below, the keyless start control module makes the key indicator light flash in red and the buzzer sound to call the driver's attention.
ALARM FUNCTION REFERENCE
| Condition | Buzzer operation | Key indicator light operation |
|---|---|---|
| Ignition knob switch has stopped between ACC and OFF positions while driver side door is opened (ignition knob switch un-returned alarm) | Intermittent | - |
| Ignition switch has stopped between ACC and OFF positions while driver side door is closed (ignition knob switch un-returned alarm) | 2 times | Flashing in red |
| Remote controller is carried out of vehicle and doors are closed while ignition switch is at ON position (remote controller carried-out alarm) 5 times Flashing in red Remote controller is carried out of vehicle through a window without opening door while ignition switch is at ON position (engine is running) and vehicle has been driven at 10km/h (6 MPH) or more speed without remote controller in vehicle compartment (the first time 10 km/h (6 MPH) speed is exceeded only) (Remote controller carried-out alarm) | 5 times | Flashing in red |