Engine Control Module (ECM) Removal and Installation: Notes

CAUTION: As ECM consists of precision parts, be careful not to expose it to excessive shock.

NOTE:

For vehicle equipped with EVAP leak check system:
If ECM is replaced with new one (VIN data is still not registered) or with used one (VIN data of other vehicle has been registered previously), make sure that re-register VIN data correctly by performing VIN Registration (EVAP Leak Check Model) .

Otherwise, MIL remains on even if the engine stared or it causes the inconsistency between registered VIN data in ECM and actual VIN.
For vehicle equipped with immobilizer control system:
If ECM is replaced with new one or with another one, make sure to register immobilizer transponder code to ECM correctly according to Procedure after ECM Replacement .