Technical Service Bulletins
- A/C Compressor
- Accessories & Equipment
- Accessories Control Systems
- Air Bag, SRS
- Anti-Lock Brakes
- Automatic Trans
- Replacing And Tightening Torque Converter Bolts During Transmission Replacement (TS 01 04022R2)
- Replacing And Tightening Torque Converter Bolts During Transmission Replacement (TS 01 12200)
- Error Code 7156 When Attempting To Program Or Reprogram With Pass-Thru Reprogramming Software Version 1.9.0.2 (TS 06 06257)
- Replacement Bolts Are Not The Same Color As The Original Bolts (TS 03 03296)
- Axle Shafts
- Brakes Control Systems
- Cooling System (Mechanical)
- Driveshaft & Universal Joints
- Engine Control Systems
- Blank ECM Fails To Program (TS 07 10218)
- Extended Cranking Time (TS 06 06168)
- REPLACEMENT ECMs ARE SHIPPED BLANK AND MUST BE PROGRAMMED BEFORE OPERATION (TS 03 10117)
- Error Code 7156 When Attempting To Program Or Reprogram With Pass-Thru Reprogramming Software Version 1.9.0.2 (TS 06 06257)
- Mil On With DTC P0607 (ECM Internal Processor Error) Customer Satisfaction Campaign "Ml" (TS 01 11286R)
- Electronic Control Unit (Ecu) Reprogramming Verification Procedure Using The SUZUKI SDS Tool (TS 05 10056)
- VIN # Registration After ECM Replacement (TS 04 10214)
- Exterior Lights
- Front Suspension
- Headlights
- HVAC Control Systems
- Identification
- Interior/Exterior Trim
- Lubrication System
- Manual Trans
- Mechanical
- Hydraulic Versus Mechanical TENSIONERS (TT001-13)
- Service Manual Update: Correction Of The Nominal Diameter For The Cylinder Head Bolt (TS 08 12220)
- Service Manual Update: Tappet Shim Thickness Changes And Availability (TS 02 07067)
- Replacement Bolts Are Not The Same Color As The Original Bolts (TS 03 03296)
- Mechanical - Hydraulic
- Parking Brake System
- Restraints Control Systems
- Steering Column
- Steering Control Systems
- System
- Blank ECM Fails To Program (TS 07 10218)
- Cold Engine Will Not Continue To Run And Requires Restart. After Restart The Malfunction Indicator Lamp (Mil) May Illuminate With DTC P2237 (O2 Sensor Positive Current Control Circuit/Open) Stored In Memory (TS 05 02218)
- Engine Oil Filter Change Precautions; O2 Sensor Contamination Possible Cause Of DTCS P0137 And/Or P0420 (TS 04 11307)
- Error Code 7156 When Attempting To Program Or Reprogram With Pass-Thru Reprogramming Software Version 1.9.0.2 (TS 06 06257)
- Mil On With DTC P0607 (ECM Internal Processor Error) Customer Satisfaction Campaign "Ml" (TS 01 11286R)
- Transmission Control Systems
- Wheel Alignment
- Wheels & Tire System
- Wiper/Washer Systems
- Wiring Diagrams