Tightening Torque Specifications
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N.m | kgf-m | lb-ft | ||
| Transfer oil level / filler plug | 23 | 2.3 | 17.0 | |
| Transfer oil drain plug | 23 | 2.3 | 17.0 | |
| Stiffener No.1 bolt and No.2 bolt | 55 | 5.5 | 40.0 | |
| Transfer to transaxle bolt | 98 | 9.8 | 71.0 | |
| Engine rear mounting upper nut | 25 | 2.5 | 18.0 | |
| Engine rear mounting lower nut | 55 | 5.5 | 40.0 | |
| Transfer case bolt | 23 | 2.3 | 17.0 | |
| Transfer output retainer bolt | 55 | 5.5 | 40.0 | |
| Oil plate bolt | 9 | 0.9 | 6.5 | |
| Rotational torque of bevel pinion (Bearing preload) | 0.50 - 1.30 | 0.05 - 0.13 | 0.35 - 0.95 | |
NOTE:
The specified tightening torque is also described in the following.
TRANSFER ASSEMBLY COMPONENTS
TRANSFER ASSEMBLY COMPONENTS
Reference:
For the tightening torque of fastener not specified in this article, refer to FASTENERS INFORMATION .