LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Repair Instructions >> Battery Current Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

Fig 1: Battery Current Sensor
G04843491Courtesy of SUZUKI OF AMERICA CORP.
  1. Squeeze the negative battery cable branches together.
    NOTE: Ensure the battery current sensor is installed in the correct direction and location on the negative battery cable.
  2. Slide the NEW battery current sensor (1) up onto the negative battery cable to the location previously marked during removal.
  3. Wrap electrical tape around the battery current sensor leg in order to secure the sensor to the negative battery cable.
  4. Install the negative battery cable clip to the cable to the locations previously marked during removal.
  5. Install the negative battery cable. Refer to INSTALLATION PROCEDURE .
scientia non olet · About LEMON Manuals