Installation Procedure

Fig 1: Battery Negative Cable Terminal Bolt (2 Of 2)

Courtesy of SUZUKI OF AMERICA CORP.

CAUTION: Refer to FASTENER NOTICE .

NOTE: Clean any existing corrosion from the battery terminal bolt flange and the battery cable end.

Install the battery negative cable to the battery.
Tightening torque

Tighten the battery negative cable terminal bolt to 17 N.m (13 lb ft).

Fig 2: Battery Box Cover, Retainers And Installation Directions
Courtesy of SUZUKI OF AMERICA CORP.
Insert the battery box cover (3) into the retaining (2).
Lock the side snap retainers (1).

Fig 3: ECM And Retainers
Courtesy of SUZUKI OF AMERICA CORP.
Grasp the ECM retainer and slide the retainer forward until the retainer locks against the 4 clips on the battery cover.
Program all of the customer's radio station presets and set the radio clock to the current time.