LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Electrical Devices >> Repair Instruction >> Accelerator Pedal Position Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

Fig 1: Identifying APP Sensor Harness Connector
G04841319Courtesy of SUZUKI OF AMERICA CORP.
  1. Remove the instrument panel left lower closeout panel. Refer to INSTRUMENT PANEL INSULATOR PANEL REPLACEMENT - LEFT SIDE .
  2. Remove the driver knee bolster. Refer to KNEE BOLSTER REPLACEMENT .
  3. Remove the connector position assurance (CPA) from the accelerator pedal position (APP) sensor connector.
  4. Disconnect the APP sensor harness connector.
    NOTE: Due to clearance issues, the upper attachment bolt cannot be removed from the accelerator pedal assembly. Loose then bolt completely and leave the bolt in the component until the assembly is removed from the vehicle.
  5. Remove the APP assembly attachment bolts.
    Fig 2: Removing APP Assembly
    G04841320Courtesy of SUZUKI OF AMERICA CORP.
  6. Remove the APP assembly from the vehicle.
scientia non olet · About LEMON Manuals