LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Electrical Devices >> Repair Instruction >> Crankshaft Position Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

Fig 1: Installing Crankshaft Position Sensor
G04841325Courtesy of SUZUKI OF AMERICA CORP.
  1. Install the crankshaft position sensor.
    CAUTION: Refer to FASTENER NOTICE .
  2. Install the crankshaft position sensor bolt.

    Tightening torque 

    Tighten the bolt to 10 N.m (89 lb in)  .

    Fig 2: Connecting Engine Wiring Harness Electrical Connector To CKP Sensor
    G04841326Courtesy of SUZUKI OF AMERICA CORP.
  3. Connect the engine wiring harness electrical connector to the CKP sensor.
  4. If equipped with all AWD, install the transfer case. Refer to INSTALLATION PROCEDURE .
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals