LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Electrical Devices >> Repair Instruction >> Engine Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

Fig 1: Disconnecting Engine Wiring Harness Electrical Connector
G04841369Courtesy of SUZUKI OF AMERICA CORP.
  1. Turn the ignition OFF.
  2. Using a scan tool, retrieve the percentage of remaining engine oil and the remaining automatic transmission fluid life. Record the remaining engine oil and the remaining automatic transmission fluid life.
  3. Disconnect the negative battery cable. Refer to BATTERY NEGATIVE CABLE DISCONNECTION AND CONNECTION .
  4. Disconnect the engine wiring harness electrical connector (2) from the ECM.
    CAUTION: In order to prevent any possible electrostatic discharge damage to the ECM, do not touch the connector pins.
    Fig 2: Identifying ECM Retainer
    G04841370Courtesy of SUZUKI OF AMERICA CORP.
  5. Grasp the ECM retainer and slide the retainer rearward until the retainer disengages from the 4 clips on the battery cover.
    Fig 3: Identifying ECM Retainer Clip
    G04841371Courtesy of SUZUKI OF AMERICA CORP.
  6. Disengage the clips (1) on the ECM retainer from the ECM, and slide the ECM out of the retainer.
scientia non olet · About LEMON Manuals