Installation Procedure

Fig 1: Identifying Knock Sensor & Bolt (2 Of 2)

Courtesy of SUZUKI OF AMERICA CORP.

CAUTION: Refer to FASTENER NOTICE .

Position the knock sensor and tighten the knock sensor bolt.
Tightening torque

Tighten the bolt to 23 N.m (17 lb ft) .

Fig 2: Connecting Engine Wiring Harness Electrical Connector
Courtesy of SUZUKI OF AMERICA CORP.
Connect the engine wiring harness electrical connector (2) to the bank 2 knock sensor.
Lower the vehicle.