LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Electrical Devices >> Repair Instruction >> Knock Sensor Replacement - Bank 2 >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

Fig 1: Disconnecting Engine Wiring Harness Electrical Connector From Bank 2 Knock Sensor
G04841365Courtesy of SUZUKI OF AMERICA CORP.
  1. Raise and suitably support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
  2. Disconnect the engine wiring harness electrical connector (2) from the bank 2 knock sensor.
    Fig 2: Identifying Knock Sensor & Bolt (1 Of 2)
    G04841366Courtesy of SUZUKI OF AMERICA CORP.
  3. Loosen the knock sensor bolt and remove the knock sensor.
scientia non olet · About LEMON Manuals