LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, FWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Repair Instructions >> Secondary Fuel Tank Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. If the fuel level sending unit is being replaced, install the fuel level sending unit into the new fuel pump. Refer to INSTALLATION PROCEDURE .
    Fig 1: Identifying Secondary Level Sensor Electrical Connector Tab
    G04843434Courtesy of SUZUKI OF AMERICA CORP.
  2. Connect the suction port (1).
    Fig 2: Identifying Secondary Fuel Pump Module
    G04843435Courtesy of SUZUKI OF AMERICA CORP.
  3. Insert the new secondary fuel pump module (2) with the level sender and new fuel pump-to-tank seal. Ensure the orientation tabs are aligned.
  4. Use the J39765-A to install the fuel pump lock ring.
  5. Connect the EVAP line quick connect. Refer to PLASTIC COLLAR QUICK CONNECT FITTING SERVICE .
  6. Install the fuel tank. Refer to INSTALLATION PROCEDURE  and INSTALLATION PROCEDURE .
scientia non olet · About LEMON Manuals