LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> XL7 Base, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Electrical Devices >> Repair Instructions >> Mass Airflow Sensor/Intake Air Temperature Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

Fig 1: Identifying Engine Wiring Harness Electrical Connector
G05469849Courtesy of SUZUKI OF AMERICA CORP.
  1. Remove the air cleaner outlet duct. Refer to AIR CLEANER OUTLET DUCT REPLACEMENT .
  2. Disconnect the engine wiring harness electrical connector from the mass air flow (MAF)/intake air temperature (IAT) sensor.
    Fig 2: Identifying Mass Air Flow/Intake Air Temperature Sensor
    G05469850Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove the MAF/IAT sensor screws.
  4. Remove the MAF/IAT sensor from the air cleaner assembly.
  5. Remove the MAF/IAT sensor seal.
scientia non olet · About LEMON Manuals