Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Body Control Module (BCM)

Courtesy of SUZUKI OF AMERICA CORP.

Install the BCM.
Install the Instrument Panel Lower Brace Bezel. Refer to INSTRUMENT PANEL LOWER BRACE BEZEL REPLACEMENT .
Slide the BCM (1) tabs into the slots in the I/P retainer until the tabs lock into place.

Fig 2: BCM Electrical Harness Connectors
Courtesy of SUZUKI OF AMERICA CORP.
Connect the electrical connectors.
Program a new or a remanufactured BCM. Refer to CONTROL MODULE REFERENCES .