Yaw Rate/G Sensor Assembly Removal and Installation: Notes
Reference: YAW RATE/G SENSOR ASSEMBLY ON-VEHICLE INSPECTION
CAUTION:
- When yaw rate/G sensor assembly is replaced, ESP® control module needs zero calibration. Perform zero calibration by SUZUKI scan tool. See SENSOR CALIBRATION OF ESP® COMPONENTS .
- Regarding yaw rate/G sensor assembly removal/installation, confirm specified torque and never use impact wrench to avoid damage.
- When handling the yaw rate/G sensor assembly, be careful not to drop it or apply an impact to it.
If an excessive impact was applied, never attempt disassembly or repair but replace it with a new one.